- Wide range of product available.
- Capacity: .45 through 35 tons
- Wire Rope Sizes: 1/8″ through 1-1/2″
- Angular contact bearings maximize efficiency, reliability and service
life of swivel and extend the life of the wire rope. - Designed for high rotation speed: Lower torque required to initiate rotation.
- Individually Proof Tested to 2 times the Working Load Limit with certification.
- Hook models utilize genuine Crosby hooks which are forged alloy steel, Quenched and Tempered and contain the patented QUIC-CHECK markings.
- Design Factor of 5 to 1.
- Entire swivel is Zinc plated to resist corrosion.
- Each swivel, 8.5 tons and larger is furnished with a pressure lubrication fitting.
Thimble Insert
- When terminating with wire rope clips, we recommend the use of the ThimbleInsert. The result will be extended wire rope life.
- Allows standard swivel to be used in application requiring a thimble fitting.
- For use with our Bullet Style (AS-7) and Jaw Style (AS-1, AS-2, AS-3 & AS-4) swivels.
- Machined from carbon steel. Zinc plated.
| Wire Rope Size (in.) |
AS-20 Stock No. |
| 1/2 | 1038200 |
| 5/8 | 1038209 |
| 3/4 | 1038218 |
| 7/8 – 1 | 1038227 |
| 1-1/8 – 1-1/4 | 1038236 |
| 1-1/2 | 1038245 |
Jaw & Hook
|
AS-1 JAW & HOOK
|
Dimensions (in.) |
Deformation
Indicator AA |
|||||||||||
| Wking Load Limit* (Tons) |
Wire Line Size (in.) |
AS-1 Stock No. |
Wght Each (lbs.) |
A | B | C | D | E | F | G | H | I | |
| .45 | 1/8 | 1016001 | .7 | .88 | .25 | .25 | .38 | .41 | 4.32 | 2.86 | .93 | .73 | 1.50 |
| .75 | 1/4 | 1016010 | 1.5 | 1.31 | .38 | .31 | .44 | .56 | 5.44 | 3.16 | .97 | .84 | 1.50 |
| 1.5 | 3/8 | 1016025 | 2.3 | 1.63 | .50 | .50 | .69 | .78 | 6.35 | 4.00 | 1.16 | 1.14 | 1.50 |
| 3.0 | 1/2 | 1016026 | 6.5 | 2.00 | .75 | .75 | .94 | 1.19 | 8.69 | 4.84 | 1.41 | 1.44 | 2.50 |
| 5.0 | 5/8 | 1016040 | 12.9 | 2.50 | .88 | 1.00 | 1.13 | 1.53 | 10.71 | 6.28 | 1.69 | 1.82 | 3.00 |
| 8.5 | 3/4 | 1016045 | 26.4 | 3.00 | 1.19 | 1.56 | 1.34 | 2.09 | 13.65 | 8.34 | 2.41 | 2.60 | 4.00 |
| 10 | 7/8 | 1016056 | 53.0 | 4.00 | 1.50 | 1.75 | 1.75 | 3.50 | 17.95 | 10.34 | 3.19 | 3.00 | 5.00 |
| 15 | 1 | 1016064 | 53.0 | 4.00 | 1.50 | 1.75 | 1.75 | 3.50 | 17.95 | 10.34 | 3.19 | 3.00 | 5.00 |
| 25 | 1-1/4 | 1016075 | 97.0 | 5.00 | 2.00 | 2.00 | 2.38 | 3.69 | 20.88 | 13.62 | 3.25 | 3.62 | 6.50 |
| 35 | 1-1/2 | 1016082 | 140.0 | 5.00 | 2.00 | 2.00 | 2.38 | 3.69 | 24.00 | 14.06 | 3.00 | 4.56 | 7.00 |
*Ultimate Load is 5 times the Working Load Limit
Jaw & Jaw
|
AS-2
JAW & JAW |
Dimensions
(in.) |
||||||||||
|
Working
Load Limit (Tons)* |
WIre
Line Size (in.) |
AS-2
Stock No. |
Weight
Each (lbs.) |
A
|
B
|
C
|
D
|
E
|
F
|
G
|
H
|
|
.45
|
1/8
|
1016103
|
.4
|
.88
|
2.38
|
3.13
|
.38
|
.25
|
.25
|
.19
|
.41
|
|
.75
|
1/4
|
1016114
|
.9
|
1.31
|
3.56
|
4.44
|
.44
|
.31
|
.38
|
.22
|
.56
|
|
1.5
|
3/8
|
1016122
|
2.0
|
1.63
|
4.06
|
5.44
|
.69
|
.50
|
.50
|
.28
|
.78
|
|
3.0
|
1/2
|
1016131
|
4.9
|
2.00
|
6.25
|
8.13
|
.94
|
.75
|
.75
|
.38
|
1.19
|
|
5.0
|
5/8
|
1016139
|
9.6
|
2.50
|
7.75
|
10.63
|
1.13
|
1.00
|
.88
|
.53
|
1.53
|
|
8.5
|
3/4
|
1016148
|
15.8
|
3.00
|
9.63
|
12.31
|
1.34
|
1.56
|
1.19
|
.56
|
2.09
|
|
10
|
7/8
|
1016157
|
40.0
|
4.00
|
14.00
|
17.50
|
1.75
|
1.75
|
1.50
|
.81
|
3.50
|
|
15
|
1
|
1016166
|
40.0
|
4.00
|
14.00
|
17.50
|
1.75
|
1.75
|
1.50
|
.81
|
3.50
|
|
25
|
1-1/4
|
1016175
|
78.0
|
5.00
|
15.94
|
20.69
|
2.38
|
2.00
|
2.00
|
1.13
|
3.69
|
|
35
|
1-1/2
|
1016184
|
78.0
|
5.00
|
15.94
|
20.69
|
2.38
|
2.00
|
2.00
|
1.13
|
3.69
|
*Ultimate Load is 5 times the Working Load Limit
Jaw & Eye
| AS-3 JAW & EYE |
Dimensions (in.) |
||||||||||||||
| Wkng Load Limit (tons) |
Wire Line Size (in.) |
AS-3 Stock No. |
Wght Each (lbs.) |
A | B | C | D | E | F | G | H | I | J | K | L |
| .45 | 1/8 | 1016205 | .3 | .88 | 2.50 | 3.25 | .25 | .19 | .25 | .38 | .41 | .25 | .25 | .38 | .84 |
| .75 | 1/4 | 1016216 | .9 | 1.31 | 3.69 | 4.56 | .31 | .22 | .38 | .44 | .56 | .31 | .38 | .44 | .88 |
| 1.5 | 3/8 | 1016224 | 1.9 | 1.63 | 4.19 | 5.44 | .50 | .28 | .50 | .69 | .78 | .50 | .66 | .63 | 1.38 |
| 3.0 | 1/2 | 1016232 | 4.6 | 2.00 | 6.19 | 8.13 | .75 | .38 | .75 | .94 | 1.19 | .75 | .91 | 1.00 | 2.00 |
| 5.0 | 5/8 | 1016243 | 9.1 | 2.50 | 7.88 | 10.19 | 1.00 | .53 | .88 | 1.13 | 1.50 | 1.00 | 1.25 | 1.19 | 2.63 |
| 8.5 | 3/4 | 1016250 | 15.6 | 3.00 | 9.50 | 12.25 | 1.56 | .56 | 1.25 | 1.34 | 2.09 | 1.25 | 1.41 | 1.50 | 3.13 |
| 10 | 7/8 | 1016259 | 39.0 | 4.00 | 13.75 | 17.31 | 1.75 | .81 | 1.50 | 1.75 | 3.50 | 2.00 | 1.63 | 1.81 | 4.69 |
| 15 | 1 | 1016268 | 40.0 | 4.00 | 13.44 | 17.31 | 1.75 | .81 | 1.50 | 1.75 | 3.50 | 2.00 | 2.00 | 2.13 | 4.69 |
| 25 | 1-1/4 | 1016277 | 78.0 | 5.00 | 16.00 | 20.75 | 2.00 | 1.13 | 2.00 | 2.38 | 3.69 | 2.25 | 2.31 | 2.38 | 5.25 |
| 35 | 1-1/2 | 1016286 | 78.0 | 5.00 | 16.00 | 20.75 | 2.00 | 1.13 | 2.00 | 2.38 | 3.69 | 2.25 | 2.31 | 2.38 | 5.2 |
*Ultimate Load is 5 times the Working Load Limit
Eye & Jaw
| AS-4 EYE & JAW |
Dimensions (in.) |
||||||||||||||
| Working Load Limit* (tons) |
Wire Line Size (in.) |
AS-4 Stock No. |
Weight Each (lbs.) |
A | B | C | D | E | F | G | H | I | J | K | L |
| .45 | 1/8 | 1016306 | .3 | .88 | 2.50 | 3.25 | .25 | .19 | .25 | .38 | .41 | .25 | .25 | .38 | .81 |
| .75 | 1/4 | 1016314 | .9 | 1.31 | 3.63 | 4.56 | .31 | .22 | .38 | .44 | .56 | .31 | .38 | .44 | .88 |
| 1.5 | 3/8 | 1016325 | 1.9 | 1.63 | 4.19 | 5.50 | .50 | .28 | .50 | .69 | .78 | .50 | .66 | .63 | 1.34 |
| 3.0 | 1/2 | 1016332 | 4.6 | 2.00 | 6.19 | 8.13 | .75 | .38 | .75 | .94 | 1.19 | .75 | .91 | 1.00 | 2.00 |
| 5.0 | 5/8 | 1016343 | 9.1 | 2.50 | 7.88 | 10.19 | 1.00 | .53 | .88 | 1.13 | 1.44 | 1.00 | 1.25 | 1.19 | 2.63 |
| 8.5 | 3/4 | 1016352 | 15.7 | 3.00 | 9.44 | 12.25 | 1.56 | .56 | 1.19 | 1.34 | 2.09 | 1.25 | 1.41 | 1.50 | 3.13 |
| 10 | 7/8 | 1016361 | 39.0 | 4.00 | 14.13 | 17.75 | 1.75 | .81 | 1.50 | 1.75 | 3.50 | 1.72 | 1.66 | 1.81 | 4.69 |
| 15 | 1 | 1016370 | 40.0 | 4.00 | 13.81 | 17.75 | 1.75 | .81 | 1.50 | 1.75 | 3.50 | 2.00 | 2.03 | 2.13 | 4.69 |
| 25 | 1-1/4 | 1016375 | 75.0 | 5.00 | 15.94 | 20.75 | 2.00 | 1.13 | 2.31 | 2.38 | 3.69 | 2.25 | 2.31 | 2.38 | 5.25 |
| 35 | 1-1/2 | 1016379 | 75.0 | 5.00 | 15.94 | 20.75 | 2.00 | 1.13 | 2.31 | 2.38 | 3.69 | 2.25 | 2.31 | 2.38 | 5.25 |
*Ultimate Load is 5 times the Working Load Limit
Eye & Eye
| AS-5 EYE & EYE | Dimensions (in.) |
|||||||||
| Working Load Limit* (tons) |
Wire Line Size (in.) |
AS-5 Stock No. |
Weight Each (lbs.) |
A | B | C | D | E | F | G |
| .45 | 1/8 | 1016409 | .3 | .88 | 2.63 | 3.38 | .38 | .25 | .25 | .81 |
| .75 | 1/4 | 1016418 | .9 | 1.31 | 3.75 | 4.63 | .44 | .31 | .38 | .88 |
| 1.5 | 3/8 | 1016427 | 1.8 | 1.63 | 4.31 | 5.56 | .63 | .50 | .66 | 1.34 |
| 3.0 | 1/2 | 1016436 | 4.3 | 2.00 | 6.13 | 8.13 | 1.00 | .75 | .91 | 2.00 |
| 5.0 | 5/8 | 1016445 | 8.6 | 2.50 | 7.75 | 10.63 | 1.19 | 1.00 | 1.25 | 2.63 |
| 8.5 | 3/4 | 1016454 | 15.4 | 3.00 | 9.31 | 12.31 | 1.50 | 1.25 | 1.41 | 3.13 |
| 10 | 7/8 | 1016463 | 37.0 | 4.00 | 13.88 | 17.50 | 1.81 | 1.72 | 1.63 | 4.69 |
| 15 | 1 | 1016472 | 39.0 | 4.00 | 13.25 | 17.50 | 2.13 | 2.00 | 2.13 | 4.69 |
| 25 | 1-1/4 | 1016481 | 72.0 | 5.00 | 16.00 | 20.75 | 2.38 | 2.25 | 2.31 | 5.25 |
| 35 | 1-1/2 | 1016490 | 72.0 | 5.00 | 18.00 | 20.75 | 2.38 | 2.25 | 2.31 | 5.25 |
*Ultimate Load is 5 times the Working Load Limit
Eye & Hook
| AS-6 EYE & HOOK |
Dimensions (in.) |
Deformation Indicator AA |
||||||||||
| Working Load Limit* (tons) |
Wire Line Size (in.) |
AS-6 Stock No. |
Weight Each (lbs.) |
A | B | C | D | E | F | G | H | |
| .45 | 1/8 | 1016502 | .7 | .88 | 4.38 | 2.86 | .93 | .25 | .81 | .25 | .73 | 1.50 |
| .75 | 1/4 | 1016513 | 1.5 | 1.31 | 5.56 | 3.16 | .97 | .38 | .88 | .31 | .84 | 1.50 |
| 1.5 | 3/8 | 1016520 | 2.9 | 1.63 | 6.22 | 4.00 | 1.16 | .66 | 1.34 | .50 | 1.14 | 1.50 |
| 3.0 | 1/2 | 1016529 | 6.2 | 2.00 | 8.63 | 4.84 | 1.41 | .91 | 2.00 | .75 | 1.44 | 2.50 |
| 5.0 | 5/8 | 1016538 | 12.4 | 2.50 | 10.77 | 6.28 | 1.69 | 1.25 | 2.63 | 1.00 | 1.82 | 3.00 |
| 8.5 | 3/4 | 1016547 | 23.5 | 3.00 | 13.52 | 8.34 | 2.41 | 1.40 | 3.13 | 1.25 | 2.60 | 4.00 |
| 10 | 7/8 | 1016556 | 52.0 | 4.00 | 18.08 | 10.34 | 3.19 | 1.66 | 4.69 | 1.72 | 3.00 | 5.00 |
| 15 | 1 | 1016565 | 53.0 | 4.00 | 17.64 | 10.34 | 3.19 | 2.03 | 4.69 | 2.00 | 3.00 | 5.00 |
| 25 | 1-1/4 | 1016574 | 94.0 | 5.00 | 20.88 | 13.62 | 3.25 | 2.34 | 5.25 | 2.25 | 3.62 | 6.50 |
| 35 | 1-1/2 | 1016583 | 138.0 | 5.00 | 24.00 | 14.06 | 3.00 | 2.34 | 5.25 | 2.25 | 4.56 | 7.00 |
*Ultimate Load is 5 times the Working Load Limit
Bullet Style Jaw & Jaw
| AS-7 Bullet Style JAW & JAW |
Dimensions (in.) |
||||||||||||||
| Working Load Limit* (Tons) |
Wire Line Size (in.) |
AS-7 Stock No. |
Weight Each (lbs.) |
A | B | C | D | E | F | G | |||||
| .45 | 1/8 | 1016604 | .4 | .88 | 2.38 | 3.13 | .38 | .25 | .31 | .40 | |||||
| .75 | 1/4 | 1016611 | 1.1 | 1.31 | 3.56 | 4.44 | .44 | .31 | .38 | .56 | |||||
| 1.5 | 3/8 | 1016622 | 1.8 | 1.63 | 4.06 | 5.19 | .56 | .50 | .44 | .81 | |||||
| 3.0 | 1/2 | 1016631 | 3.8 | 2.00 | 5.44 | 7.06 | .81 | .75 | .63 | .94 | |||||
| 5.0 | 5/8 | 1016640 | 8.0 | 2.50 | 7.75 | 10.06 | 1.13 | 1.00 | .88 | 1.56 | |||||
| 8.5 | 3/4 | 1016649 | 14.5 | 3.00 | 9.88 | 12.38 | 1.25 | 1.31 | 1.00 | 2.13 | |||||
| 10 | 7/8 | 1016652 | 40.0 | 4.00 | 13.13 | 16.75 | 1.75 | 1.75 | 1.50 | 3.25 | |||||
| 15 | 1 | 1016658 | 40.0 | 4.00 | 13.13 | 16.75 | 1.75 | 1.75 | 1.50 | 3.25 | |||||
| 25 | 1-1/4 | 1016662 | 84.0 | 5.00 | 15.94 | 20.75 | 2.38 | 2.00 | 2.00 | 3.69 | |||||
| 35 | 1-1/2 | 1016667 | 84.0 | 5.00 | 15.94 | 20.75 | 2.38 | 2.00 | 2.00 | 3.69 | |||||
*Ultimate Load is 5 times the Working Load Limit
Thimble & Jaw
| AS-11 THIMBLE & JAW |
Dimensions (in.) |
||||||||||||||
| Working Load Limit* (Tons) |
Wire Line Size (in.) |
AS-11 Stock No. |
Weight Each (lbs.) |
A | B | C | D | E | F | G | |||||
| 8.5 | 3/4 | 1017020 | 18.0 | 3.00 | 8.66 | 13.00 | 1.34 | 1.56 | 1.19 | 2.09 | |||||
| 15 | 1 | 1017029 | 42.0 | 4.00 | 11.66 | 17.53 | 1.75 | 1.78 | 1.50 | 3.50 | |||||
*Ultimate Load is 5 times the Working Load Limit
Bullet Style Jaw & Jaw Slurry Swivel
- The Crosby AS-17 Slurry Swivel is a zinc plated Bullet Type Swivel (AS-7), designed with two rubber lip style seals about the shaft. The threaded cap is sealed with a silicone sealant and secured with a set screw. The swivels are provided with an Alemite grease fitting for easy lubrication.
| AS-17 BULLET JAW SLURRY SWIVEL |
Dimensions (in.) |
|||||||||
| Working Load Limit* (tons) |
Wire Line Size (in.) |
AS-5 Stock No. |
Weight Each (lbs.) |
A | B | C | D | E | F | G |
| 8.5 | 3/4 | 8013342 | 14.5 | 3.00 | 10.13 | 12.63 | 1.25 | 1.31 | 1.00 | 2.13 |
| 15 | 1 | 8013343 | 40.0 | 4.00 | 13.50 | 17.00 | 1.75 | 1.75 | 1.50 | 3.25 |
| 25 | 1-1/4 | 8013376 | 84.0 | 5.00 | 16.16 | 20.92 | 2.38 | 2.00 | 2.00 | 3.69 |
| 35 | 1-1/2 | 8013344 | 84.0 | 5.00 | 16.16 | 20.92 | 2.38 | 2.00 | 2.00 | 3.69 |
*Ultimate Load is 5 times the Working Load Limit
