- Forged from special bar quality carbon steel, suitable for cold forming.
- Swage Socket terminations have an efficiency rating of 100% based on the catalog strength of wire rope.
- Hardness controlled by spheroidize annealing.
- Stamp for identification after swaging without concern for fractures (as per directions in National Swaging Brochure).
Rope Diameter (in.) |
RATED CAPACITY IN TONS OF 2000 lbs. |
|
EIPS | EEIPS | |
1/4 | 0.68 | 0.74 |
5/16 | 1.10 | 1.20 |
3/8 | 1.50 | 1.70 |
7/16 | 2.00 | 2.20 |
1/2 | 2.70 | 2.90 |
9/16 | 3.40 | 3.70 |
5/8 | 4.10 | 4.50 |
3/4 | 5.90 | 6.50 |
7/8 | 8.00 | 8.80 |
1 | 10.00 | 11.00 |
1-1/8 | 13.00 | 14.00 |
1-1/4 | 16.00 | 18.00 |
1-3/8 | 19.00 | 21.00 |
1-1/2 | 23.00 | 25.00 |
1-3/4 | 31.00 | 34.00 |
2 | 40.00 | 43.00 |
2-1/4 | 49.00 | 54.00 |
2-1/2 | 60.00 | 66.00 |
OPEN SWAGED SOCKETS
Rope Diameter |
C | D | E | F | Pin | As Max. After Swage Dia. |
Ls Approx. After Swage Length |
1/4 | 0.69 | 0.38 | 1.50 | 1.38 | 0.69 | 0.46 | 4.25 |
5/16 | 0.81 | 0.47 | 1.75 | 1.62 | 0.81 | 0.71 | 5.50 |
3/8 | 0.81 | 0.47 | 1.75 | 1.62 | 0.81 | 0.71 | 5.50 |
7/16 | 1.00 | 0.56 | 2.00 | 2.00 | 1.00 | 0.91 | 7.00 |
1/2 | 1.00 | 0.56 | 2.00 | 2.00 | 1.00 | 0.91 | 7.00 |
9/16 | 1.25 | 0.68 | 2.25 | 2.38 | 1.19 | 1.16 | 8.50 |
5/8 | 1.25 | 0.68 | 2.25 | 2.38 | 1.19 | 1.16 | 8.50 |
3/4 | 1.50 | 0.78 | 2.75 | 2.75 | 1.38 | 1.42 | 10.50 |
7/8 | 1.75 | 0.94 | 3.25 | 3.13 | 1.62 | 1.55 | 12.25 |
1 | 2.00 | 1.06 | 3.75 | 3.69 | 2.00 | 1.80 | 14.00 |
1-1/8 | 2.25 | 1.19 | 4.25 | 4.06 | 2.25 | 2.05 | 15.75 |
1-1/4 | 2.50 | 1.22 | 4.75 | 4.50 | 2.50 | 2.30 | 17.25 |
1-3/8 | 2.50 | 1.38 | 5.25 | 5.00 | 2.50 | 2.56 | 19.00 |
1-1/2 | 3.00 | 1.69 | 5.75 | 5.50 | 2.75 | 2.81 | 20.75 |
1-3/4 | 3.50 | 2.11 | 6.75 | 6.69 | 3.50 | 3.06 | 24.25 |
2 | 4.00 | 2.37 | 8.00 | 8.00 | 3.75 | 3.56 | 28.25 |
** all dimensions are in inches
CLOSED SWAGE SOCKETS
Rope Diameter |
C | D | E | As Max. After Swage Dia. |
Ls Approx. After Swage Length |
1/4 | 1.38 | 0.75 | 0.50 | 0.46 | 3.75 |
5/16 | 1.62 | 0.88 | 0.67 | 0.71 | 4.75 |
3/8 | 1.62 | 0.88 | 0.67 | 0.71 | 4.75 |
7/16 | 2.00 | 1.06 | 0.86 | 0.91 | 6.00 |
1/2 | 2.00 | 1.06 | 0.86 | 0.91 | 6.00 |
9/16 | 2.38 | 1.25 | 1.13 | 1.16 | 7.75 |
5/8 | 2.38 | 1.25 | 1.13 | 1.16 | 7.75 |
3/4 | 2.88 | 1.44 | 1.31 | 1.42 | 9.25 |
7/8 | 3.12 | 1.69 | 1.50 | 1.55 | 10.75 |
1 | 3.63 | 2.06 | 1.75 | 1.80 | 12.25 |
1-1/8 | 4.00 | 2.31 | 2.00 | 2.05 | 13.50 |
1-1/4 | 4.50 | 2.56 | 2.25 | 2.30 | 15.25 |
1-3/8 | 5.00 | 2.56 | 2.25 | 2.56 | 16.75 |
1-1/2 | 5.50 | 2.81 | 2.50 | 2.81 | 18.00 |
1-3/4 | 6.25 | 3.56 | 3.00 | 3.06 | 21.25 |
2 | 7.25 | 3.81 | 3.25 | 3.56 | 24.25 |
** all dimensions are in inches